Duradek

The Waterproof Vinyl Roof & Walking Deck Membrane System that provides style as much as function. Permanent waterproof protection for sundecks, roofdecks, balconies & other areas.

Available in many stylish colors, patterns & textures Industry-leading 10-Year Warranty All Duradek sheet vinyl is designed for strength, stability and slip-resistance.

Seams

The strength of our system is in the method we use to weld the vinyl sheets together. The vinyl sheets are overlapped and heat fused. The seam is visible. Other systems that previously offered invisible seams resulted in waterproofing failures.

Scuffing

Like any other floor surface, vinyl may scuff if abused. Try to avoid dragging heavy objects over unprotected PVC. Skidding a bicycle tire, a roller blade or the edge of a running shoe across the vinyl creates friction, and the extreme heat and abrasion may possibly remove the print. Our membranes are manufactured with a solid ‘base’ color, which is complementary, rather than obtrusive if the print finish is removed. Normal traffic will not damage the vinyl at all. Solid color membranes are available for high traffic areas.

Colour/Print

As a rule, the lighter the color you choose, the cooler the surface will stay and the less deterioration will occur. Darker colors will fade faster and be warmer on the feet. All vinyl tends to ‘yellow’ slightly. Gray’s show it the most, while the ‘yellowing’ is hidden within earth-toned products.

Products with higher contrast in the print may show signs of fading sooner than low contrast colors. Solid colors will resist the visible effects of the UV the longest. However, high contrast in the print helps to hide blemishes in the floor surface beneath, as well as the other from everyday use. The lower the contrast in colors, the more these blemishes and the dirt will show. Solid color products are the most unforgiving. Blemishes such as plywood seams, nail head depressions or even plywood grain patterns can show up in late evening or early morning sunshine which casts a long, revealing shadow.

With our 30-plus years of experience, Duradek membranes are designed with proven blends of color, print and texture which offer the most long-lasting performance the industry can offer.

Subsurface

The better the surface, the better-finished floor we can give you. Sanded plywood or cement board will give the best-finished surface possible. As a rule, ¼” x 3/8″ plywood will warp due to absorption of moisture from the atmosphere. We recommend ‘over laying’ with minimum ½” and preferably 5/8″ plywood or 5/16″” cement board for the flattest possible subsurface.

Slope

For the best product performance and customer enjoyment of their deck surface, the structure should be sloped (ideally 2%) to eliminate ponding water. Should the puddling occur, the area will require more regular cleaning due to the build up of dirt and pollutants. Ponding water will not affect the waterproofing of the vinyl but may eventually cause premature discoloration.

Penetrations

All penetrations (posts, pillars) must be sealed to prevent water entering under the vinyl. All wood posts or pillars will crack and give access for water to get into the subsurface and under the vinyl. Regular inspection and caulking is required. To completely waterproof a post, either fasten it to the fascia of the building or completely cover it with waterproof membrane and clad. When fastening metal rails or posts to the deck surface, all pilot holes should be filled with a sealant before screw is inserted.

Indoor Use

When using the vinyl indoors where the temperature change is slight, the vinyl can be butt seamed with a chemical sealer (like a kitchen floor seam). No perimeter fastening is required to control shrinkage.

Stains

Vinyl will resist most staining materials. Some do cause problems though. Exterior oil base stains, some oil stains, any tar or bitumen-based product, fresh cedar, and some new wolmanized lumber may permanently stain the vinyl. Biodegradable matter such as leaves when left on the vinyl for a prolonged period may also be very difficult to clean. If any of the above should occur – try to clean it off as soon as possible so the stain doesn’t have a chance to set.